Water-treatment solutions
We are a water-treatment company and a manufacturer of water technologies. We design, sell and develop systems with advanced-oxidation modules of 15, 30 and 60 m³/h recirculation flow (combinable in parallel; the treated flow is determined by testing) and L1 domestic drinking-water systems of 1 and 2.5 m³/h at a fixed price, to make water drinkable, treat wastewater, reuse it and control its quality. Start from what is happening to you and we take you to the right technology.
Water source
Custom treatment
Result
Each water situation has a different solution. Tell us what’s happening and we’ll take you straight to the right technology.
We design, sell and develop each system around your water and flow rate, with combined advanced oxidation — electrolysis and electrocoagulation, hydrodynamic cavitation and Venturi aeration — and filtration with UV disinfection when the goal is drinking-water quality.
For you if: water from your well, spring or tank is not fit to drink.
Turns well, spring or mains water into water fit to drink with the L1 system, which combines filtration and ultraviolet (UV) disinfection. Built for houses, communities and small holdings.
For you if: your process produces wastewater with organic load that is hard to treat.
Industrial wastewater treatment and add-on to a WWTP (EDAR) using advanced oxidation processes (POAC), which act on organic matter and poorly biodegradable compounds.
For you if: you want a second use for treated water and to close the loop.
Regenerates treated water for a second use (irrigation, cleaning, process), cutting mains-water use. A concrete step towards circular economy of water on your site.
For you if: you need stable chlorine and pH in drinking water.
Continuous chlorine and pH dosing and measurement to keep drinking water safe and stable in tanks, networks and small plants, with reliable readings and automatic adjustment.
For you if: you run an aggregate plant or quarry with solids-laden process water.
pH control and suspended-solids reduction of process water at aggregate plants and quarries, for recirculation or controlled discharge, protecting equipment and ponds.
For you if: you want results on your own water before you invest, or you need a unit for a limited time.
Laboratory test on your sample, pilot trial on your site and hire of pilot or full systems in Spain. This is the normal path before sizing.
For you if: you need a combined advanced-oxidation plant ready to connect, in Spain or for export.
Electrocoagulation, electrolysis and hydrodynamic cavitation in recirculation inside a shipping container, factory pre-commissioned. Three sizes plus a modular version, with published guideline prices.
For you if: you are unsure about the source, flow rate or intended use of your water.
Answer five questions in your own words (what’s happening to the water, where it comes from, what you need it for) and the configurator points you in the right direction at once and leaves you a draft study request. An engineer reviews it afterwards. We also offer international shipping.
The same method across all five solutions: first we understand your water, then we design the system around it.
We look at the source, starting quality, flow rate and intended use so we size it properly.
We choose the right train — combined advanced oxidation — electrolysis and electrocoagulation, hydrodynamic cavitation or Venturi aeration —; filtration and UV if drinking-water quality is required — and we design your system.
We advise on installation and carry out commissioning and fine-tuning, with consumables included in the first installation.
We stay with you after start-up with technical support and maintenance.
Tell us the source, approximate flow rate and intended use. We propose a custom solution, at no obligation, usually within 24–48 working hours.