Worldwide wastewater treatment observatory · 
Italy
Aguas SB Observatory · public data to understand water
WWTP PERUGIA_NON_DEPURATA_FERRIERA
Italy · official identifier IT10Q190000005
not reportedh-e design capacity (2022)
European Environment Agency — Waterbase-UWWTD, data call 2023 (versión final pública) · official identifier IT10Q190000005 · reported size not reported h-e design capacity · received load 37 h-e · data year 2022. nearest inventoried plant at 1.5 km · 6 within 10 km. Reported data with their source; estimates are not measurements of the plant.
Aguas SB does not manage this wastewater treatment plant.
WHAT THE DATA REPORT
Reported data official data · 2022
| Treatment | not reported |
|---|---|
| Nitrogen removal | not reported |
| Phosphorus removal | not reported |
| UV disinfection | not reported |
| Status | active |
| Reported coordinates | 43.0875, 12.4502 precision reported by the source: level 2 what it means |
| Source and year | European Environment Agency — Waterbase-UWWTD, data call 2023 (versión final pública) · dataset record |
REGULATORY REFERENCES
Referencia normativa: Italy
Regulatory framework of Italy. Individual applicability is not determined in this profile.
SCENARIO
Reference energy scenario for this load estimate · simulator engine
what this estimate is · Inputs: 37 p.e. of reported load; equivalent average load 24 p.e. with the reference profile of Italy (hypothesis with reported load and reference profile; not a measurement). Open this scenario in the simulator · how it is calculated and what it is not.
Reference scenario computed on the server from the reported load and the country profile; an estimate, not a measurement. The simulator recomputes it when opened.
WATER THAT COULD RETURN
Reuse potential
what this estimate is · Volume estimated from the reported load (7 m³/day of reference), not measured or available for reclamation.
NEARBY PLANTS
Nearby wastewater treatment plants
| Plant | Distance | Capacity (h-e) | Load 2022 | Treatment |
|---|---|---|---|---|
| Perugia_ponte_san_giovanni | 1.5 km | 30,000 | 19,130 | primary, secondary and tertiary |
| Perugia_ponte_valleceppi | 2.2 km | 90,000 | 38,543 | primary, secondary and tertiary |
| Deruta_torgiano_bettona_non_depurata_torgiano | 6.5 km | not reported | 13 | not reported |
| Perugia_san_martino | 7.4 km | 8,000 | 6,668 | primary, secondary and tertiary |
| Perugia_pian_della_genna | 7.4 km | 98,000 | 65,763 | primary, secondary and tertiary |
Distances are between reported coordinates; proximity does not establish a hydraulic connection.
QUESTIONS
Frequently asked questions about this plant
What capacity does WWTP PERUGIA_NON_DEPURATA_FERRIERA report?
Reported size: not reported h-e design capacity. Received load: 37 h-e. Units are retained without conversion.
What treatment is reported?
Treatment not reported. Nitrogen, phosphorus and UV are shown only when explicitly reported.
How much energy would a reference plant use with the load of PERUGIA_NON_DEPURATA_FERRIERA?
Aguas SB simulator reference scenario for 37 p.e. of reported load: 3,219 kWh per year (133.3 kWh per p.e. of average load), with aeration as 33 % of consumption. Estimate with the country reference profile; not a measurement of the plant.
SOURCE AND CORRECTIONS
Source
reported data · European Environment Agency — Waterbase-UWWTD, data call 2023 (versión final pública) · data 2022 · edition 2023 · source licence: CC BY 4.0 · JSON for this plant · suggest a correction · catalogue 2026-11-06. Reported data, not a current inspection; no compliance judgements.